Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Mountain

$3,700.00 - $5,299.00 $5,299.00 Up to 30% Off
The Hard Charging All-Rounder The Sentinel inspires confidence like you're wearing full body armor. It's forgiving do-it-all attitude truly blurs the lines between planted bottomless sender and playful poppy trail pony. Whether you're chasing EWS dreams or just a weekend afternoon escape, it will bring out the best in you. So easy to get acquainted with you'll find yourself sending lines, jumps and maneuvers you always felt were beyond your ability. Where before you went around, now you go over. Where you pushed up, now you pedal. Where you rolled, now you boost. GIDDYUP SUSPENSION DESIGN We want to make it as easy as possible to experience great rear suspension performance. The GiddyUp suspension system is designed to behave intuitively across a broad range of setup. Because, we get it, sometimes you just want to grab your bike and GiddyUp, without checking your setup. When you do, it will always feel good. We did this by balancing a 25% progressive leverage curve with a consistent linear rate of change. Anti-squat is tuned to enhance pedaling performance and acceleration. Overall chain growth is moderate and reduces after sag so chain tension doesn't get in the way of the suspension working. This translates to killer small bump compliance and great mid-stroke support that gradually transitions into an end of stroke ramp that is subtle, yet supportive. The amount of consistent progression is carefully optimized for both air and coil shocks. Riders are able to add or remove volume spacers in air shocks to suite their individual riding style and there is no compromise to bottom out support with coil shocks. The Sentinel has 150mm of rear wheel travel when used with the supplied 205mm x 62.5mm stroke shock. It is also possible to install a shorter, 205mm x 57.5mm stroke shock, to decrease the rear wheel travel to 140mm. A wide usable sag range of 25 - 35% allows the rider to tune the feel of the bike; from poppy and playful, to planted for plowing. Wherever you end up, you can focus on the trail without remotes, levers or knobs. Just grab your bike and GiddyUp.
$5,925.00 - $6,499.99 $7,899.00 Up to 25% Off
The All-Country Bike Effortlessly explore, seek, and pursue the mountain in ways you never imagined. The Spur provides a sense of connection to the bike as if it were an extension to your body. Fast and efficient with an anti-gravity feel and laser-pointer precision that begs you to climb more, go farther, and descend anything you may encounter along the way. You'll instantly appreciate the free speed you're awarded while accelerating where you're usually accustomed to pedaling. Don't judge a book by its cover though, with all these lightweight and uphill oriented character traits the Spur requires no adjustment to descend like you're used to, you might actually go faster.
$649.99 - $819.99 $819.99 Up to 21% Off
The SCOTT Aspect 970 is a hardtail mountain bike that is designed to be light, efficient, and reasonably priced. Featuring disc brakes and Syncros components, this is the perfect bike for the novice or budget conscious mountain biker. Key Features: - Aspect 700/900 Alloy Frame - Suntour XCE28 100mm Fork - Shimano Tourney 21 Speed - Tektro Mechanical Disc Brakes - Kenda Booster
$2,999.99 - $3,999.99 $3,999.99 Up to 25% Off
When you think of the perfect mountain bike, what comes to mind? For us, it's the all new Contessa Spark 920. Why, you ask? Well, beyond the fact that it is fast, lightweight, and ultra-capable on all sorts of terrain, it's just damned good lookin'. Short-travel trail bike? "Downcountry" rig? Occasional race bike? Whatever, call it what you want to call it. All we know is that this is one hell of a mountain bike. Key Features: - Spark Carbon HMF-Alloy Frame - RockShox Pike Select RL3 130mm Fork - RS Deluxe Select RL3 120mm, TwinLoc - SRAM NX Eagle 12 Speed - Shimano Disc Brakes - Syncros X-30SE TR Rims - Schwalbe Wicked Will Tires - Syncros Dropper Post and Parts
$4,549.99 $6,499.99 30% Off
KEY FEATURES: - Genius Carbon HMF-Alloy Frame - FOX 36 Float Perf. Elite 160mm Fork - FOX Nude 5T EVOL, TwinLoc, 150mm - SRAM GX Eagle AXS 12 Speed - Shimano XT 4 Piston Disc Brakes - Maxxis Foldable Tires The Genius has always been our favorite bike. Smart suspension, smarter features, and the smartest design lead to an unbelievable trail bike that just can't get enough. The All-New Genius, any trail, any time. TECHNOLOGIES: PATENTED INTEGRATED SUSPENSION TECHNOLOGY The new Genius applies our patented Integrated Suspension Technology. Not only does this make for a fantastic looking bike, but it also allows us to improve the bike's suspension performance. Primarily, we can engineer frames with a lower center of gravity, resulting in better handling, and a more stable, confidence inspiring ride for the end user. Additionally, the frame’s construction is stiffer around the BB, which reduces unnecessary movements laterally to the direction of the shock’s travel. It goes without saying that the shock is also protected from debris and the elements, two of the main enemies when it comes to shock performance. EXTERNAL SAG INDICATOR Setting sag and checking travel use is easier than ever before with the new Genius. An external indicator on the link allows the end user to easily set sag and to identify how much travel they’re using. INTEGRATED HEADSET CABLE ROUTING The Genius features a Hixon Cockpit from Syncros, which has undergone a redesign. Integrating the cables presents a number of unique problems and the Hixon was designed in part to address this. Syncros’s designers worked on the shape to allow the cables to flow under the bar and around the sides of the stem before disappearing into the headset with integrated plastic parts to keep it clean and efficient. This avoids bends or kinks in the cables and provides a minimalist front end. All our bars and stems feature multiple options for computer, light, and camera mounts both on top or under the bar. EASY SHOCK ACCESS With the all-new Genius, accessing our patented integrated shock is easier than ever. Just push the button, pop off the cover, and access is yours. From here, adjusting rebound, air pressure, etc. is a mere button push away. When you're done, just pop the cover back on until you hear a "click" and off you go. NUDE SUSPENSION TECHNOLOGY Shocks with NUDE Technology have been integral to SCOTT Full suspension bikes for nearly two decades. Working closely with our suspension partners, we continue to improve upon this technology so that whether you're racing World Cups at the highest level or out for a big day in the mountains, you'll always have the best support on offer. TWINLOC SUSPENSION SYSTEM With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible. These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150mm travel when you point it downhill. From a race setting to a lunch ride, to an after-work trail shred, being able to switch from mode to mode depending on a trail's profile at the push of a lever is paramount to riding faster and having a damned good time.
$2,999.99 $3,999.99 25% Off
KEY FEATURES: - Genius Alloy Frame - FOX 36 Float Rhythm 160mm Fork - FOX Float Custom, 150mm, TwinLoc - Shimano XT-Deore 12 Speed - SRAM DB8 4 Piston Disc Brakes - Maxxis Foldable Tires The Genius has always been our favorite bike. Smart suspension, smarter features, and the smartest design lead to an unbelievable trail bike that just can't get enough. The All-New Genius, any trail, any time. TECHNOLOGIES: PATENTED INTEGRATED SUSPENSION TECHNOLOGY The new Genius applies our patented Integrated Suspension Technology. Not only does this make for a fantastic looking bike, but it also allows us to improve the bike's suspension performance. Primarily, we can engineer frames with a lower center of gravity, resulting in better handling, and a more stable, confidence inspiring ride for the end user. Additionally, the frame’s construction is stiffer around the BB, which reduces unnecessary movements laterally to the direction of the shock’s travel. It goes without saying that the shock is also protected from debris and the elements, two of the main enemies when it comes to shock performance. EXTERNAL SAG INDICATOR Setting sag and checking travel use is easier than ever before with the new Genius. An external indicator on the link allows the end user to easily set sag and identify how much travel they’re using. INTEGRATED HEADSET CABLE ROUTING The Genius features a Hixon Cockpit from Syncros, which has undergone a redesign. Integrating the cables presents a number of unique problems and the Hixon was designed in part to address this. Syncros’s designers worked on the shape to allow the cables to flow under the bar and around the sides of the stem before disappearing into the headset with integrated plastic parts to keep it clean and efficient. This avoids bends or kinks in the cables and provides a minimalist front end. All our bars and stems feature multiple options for computer, light, and camera mounts both on top or under the bar. EASY SHOCK ACCESS With the all-new Genius, accessing our patented integrated shock is easier than ever. Just push the button, pop off the cover, and access is yours. From here, adjusting rebound, air pressure, etc. is a mere button push away. When you're done, just pop the cover back on until you hear a "click" and off you go. TWINLOC SUSPENSION SYSTEM With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible. These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150mm travel when you point it downhill. From a race setting to a lunch ride to an after-work trail shred, being able to switch from mode to mode depending on a trail's profile at the push of a lever is paramount to riding faster and having a damned good time.
$4,899.99 - $6,999.99 $6,999.99 Up to 30% Off
KEY FEATURES: - Ransom Carbon HMX-Alloy Frame - FOX 38 Grip2 Perf. Elite 170mm Fork - FOX Nude TR EVOL, Tracloc, 170mm - SRAM GX Eagle 12 Speed - Shimano XT 4 Piston Disc Brakes - Maxxis EXO+ Tires The Ransom. This Enduro Mountain Bike features 170mm of trail munchin', climb-crushing, stage-winning all-day pinning mountain biking excellence. The 910 comes equipped with a FOX 38 fork, our TracLoc Suspension System, a SRAM Eagle groupset, and Syncros components to help you get away with murder, regardless of your ability level. EVO-LAP TECHNOLOGY With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology, we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without sacrificing the stiffness, comfort or impact resistance. The entire range benefitted from our Evo-Lap technology. NUDE SUSPENSION TECHNOLOGY Shocks with NUDE Technology have been integral to SCOTT Full suspension bikes for nearly two decades. Working closely with our suspension partners, we continue to improve upon this technology so that whether you're racing World Cups at the highest level or out for a big day in the mountains, you'll always have the best support on offer. RANSOM CARBON CONSTRUCTION While we always aim to have lightweight carbon bikes here at SCOTT, we never compromise frame strength when doing so. Taking into consideration the riding this bike is designed for, we have created our strongest carbon frame to date. Through clever layering and reinforcement in certain zones, we obtain the stiffness wanted between the head tube and the rear wheel axle via a path following the downtube and the chainstays - we call this the stiffness backbone. The Ransom being a 1x-only bike allowed us to optimize the width of the main pivot which is normally the weak point on this stiffness path. Additionally, the Trunnion mount on the DT close to the BB allows us to obtain great stiffness at the bottom of the bike and lightweight construction up top for compliance and for having the center of gravity as low as possible. RANSOM PROTECTION Protecting the Ransom's frame was an integral part of the project. We've integrated a clever DT protector under the BB and along the downtube, and have also implemented a newly developed, noise-silencing Chainstay/seatstay protector. A quiet ride is a fast ride.
$1,699.99 - $2,299.99 $1,699.99 - $2,299.99 Up to 25% Off
The SCOTT Scale 940 features an ultralight Carbon Frame, RockShox suspension, a SRAM Eagle drivetrain, and Syncros components to create a durable and affordable hardtail designed for world-class speed. Key Features - Scale Carbon HMF Frame - RockShox Judy 100mm - RideLoc 2-Position Remote - SRAM NX-SX Eagle 12 Speed Drivetrain - Shimano Disc Brakes - Syncros X-25 Rims - Schwalbe Rapid Rob Tires - Syncros Parts
$7,000.00 - $9,999.99 $9,999.99 Up to 30% Off
When you think of the perfect mountain bike, what comes to mind? For us, it's the Spark 900. Why you ask? Well, beyond the fact that it is fast, lightweight, and ultra-capable on all sorts of terrain, it's just damned good-lookin'. Short-travel trail bike? "Downcountry" rig? Occasional race bike? Whatever, call it what you want to call it. All we know is that this is one hell of a mountain bike. KEY FEATURES - Spark Carbon HMF Frame - FOX 34 Float Factory 130mm Fork - FOX Nude 5T EVOL, TwinLoc, 120mm - SRAM X01 Eagle AXS 12 Speed - Shimano XT 4 Piston Disc Brakes - Schwalbe Wicked Will Tires TECHNOLOGIES: EVO-LAP TECHNOLOGY With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without sacrificing the stiffness, comfort or impact resistance. The entire range benefitted from our Evo-Lap technology. ADJUSTABLE HEAD ANGLE With the new Spark, you can adjust the head angle by .6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. EASY SHOCK ACCESS Accessing the shock via the bottom bracket area is facilitated through a hatch. This makes it easy to adjust rebound, compression, shock pressure, and for installing or replacing the cable for our TwinLoc Suspension System. PATENTED INTEGRATED SUSPENSION SYSTEM An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever important one. For the optimal performance of a suspension shock, power transfer must be the most direct possible. What we want to avoid are any inefficient directional movements, in other words, lateral movements (sideways to the direction of travel) as the shock goes through its compression. Having an integrated shock allows us to improve this in several ways. Firstly, the frame construction around the shock and with the trunnion mount can be designed to be much more rigid, reducing movement and fostering more efficient power transfer. We can also add much larger bearings to the seat tube pivot, further reinforcing this area and reducing any unnecessary motion. Our integrated Suspension technology also helps us to engineer frames with a lower shock placement which lowers center of gravity. As a result, the bike benefits from better handling, and a more stable, confidence-inspiring ride for the end user. While these may seem like minor improvements individually, the sum of their parts results in more efficient shock performance. Additionally, the shock is fully protected from any foreign elements. Rainy race? No problem, your shock will continue to perform at its best regardless. REAR AXLE TOOL Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30, and a 6 Allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. SINGLE PIVOT SUSPENSION LAYOUT A full-suspension bike will never have success without, well, good suspension design. From the first time we rode the Spark’s single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark’s suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance. Please note that bike specifications are subject to change without prior notice.
$3,999.99 - $5,299.99 $5,299.99 Up to 25% Off
When you think of the perfect mountain bike, what comes to mind? For us, it's the Spark 920. Why you ask? Well, beyond the fact that it is fast, lightweight, and ultra-capable on all sorts of terrain, it's just damned good-lookin'. Short-travel trail bike? "Downcountry" rig? Occasional race bike? Whatever, call it what you want to call it. All we know is that this is one hell of a mountain bike. KEY FEATURES - Spark Carbon HMF-Alloy Frame - FOX 34 Float Perf. 130mm Fork - FOX Nude 5T EVOL, TwinLoc, 120mm - SRAM GX Eagle AXS 12 Speed - SRAM DB8 4 Piston Disc Brakes - Schwalbe Wicked Will Tires TECHNOLOGIES: EVO-LAP TECHNOLOGY With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without sacrificing the stiffness, comfort or impact resistance. The entire range benefitted from our Evo-Lap technology. ADJUSTABLE HEAD ANGLE With the new Spark, you can adjust the head angle by .6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. EASY SHOCK ACCESS Accessing the shock via the bottom bracket area is facilitated through a hatch. This makes it easy to adjust rebound, compression, shock pressure, and for installing or replacing the cable for our TwinLoc Suspension System. PATENTED INTEGRATED SUSPENSION SYSTEM An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever important one. For the optimal performance of a suspension shock, power transfer must be the most direct possible. What we want to avoid are any inefficient directional movements, in other words, lateral movements (sideways to the direction of travel) as the shock goes through its compression. Having an integrated shock allows us to improve this in several ways. Firstly, the frame construction around the shock and with the trunnion mount can be designed to be much more rigid, reducing movement and fostering more efficient power transfer. We can also add much larger bearings to the seat tube pivot, further reinforcing this area and reducing any unnecessary motion. Our integrated Suspension technology also helps us to engineer frames with a lower shock placement which lowers center of gravity. As a result, the bike benefits from better handling, and a more stable, confidence-inspiring ride for the end user. While these may seem like minor improvements individually, the sum of their parts results in more efficient shock performance. Additionally, the shock is fully protected from any foreign elements. Rainy race? No problem, your shock will continue to perform at its best regardless. REAR AXLE TOOL Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30, and a 6 Allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. SINGLE PIVOT SUSPENSION LAYOUT A full-suspension bike will never have success without, well, good suspension design. From the first time we rode the Spark’s single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark’s suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance. Please note that bike specifications are subject to change without prior notice.
$3,639.99 - $5,199.99 $5,199.99 Up to 30% Off
When you think of the perfect mountain bike, what comes to mind? For us, it's the all new Spark 920. Why, you ask? Well, beyond the fact that it is fast, lightweight and ultra capable on all sorts of terrain, it's just damned good lookin'. Short-travel trail bike? "Downcountry" rig? Occasional race bike? Whatever, call it what you want to call it. All we know is that this is one hell of a mountain bike. KEY FEATURES - Spark Carbon HMF-Alloy Frame - FOX 34 Float Perf. 130mm Fork - FOX Nude 5T EVOL, TwinLoc, 120mm - SRAM GX Eagle 12 Speed - Shimano SLX 4 Piston Disc Brakes - Syncros Silverton 2.5 TR Wheels - Schwalbe Wicked Will Tires - Syncros Dropper Post and Parts
$3,999.99 - $4,199.99 $4,199.99 - $5,299.99 Up to 25% Off
Scott’s Spark 920 makes use of a stiff, light, frame, smart suspension, and large-diameter 29er wheels to maintain speed and dominate all kinds of terrain. Its nimble, lightweight HMF carbon/alloy frame accelerates instantly, while the tapered head tube and 148 x 12mm rear axle boost control and stiffness, allowing you to carve turns with pinpoint precision. Scott’s TwinLoc remote lets you make on-the-fly adjustments to the Fox Float fork and Nude EVOL shock's 120mm of travel, so you can transition from fast climbs to technical descents with the flick of a switch. For the ever-changing trail, Syncros wheels hold your momentum, while tacky Maxxis tires dance over the dirt. The SRAM GX-X1 Eagle 12-speed group and the Shimano SLX brakes spec’d on this rig ensure your braking is just as dialed as your shifting and the included Fox dropper post ensures your saddle is right where you need it to be at all times.
$2,939.99 - $4,199.99 $4,199.99 Up to 30% Off
When you think of the perfect mountain bike, what comes to mind? For us, it's the all new Spark 940. Why, you ask? Well, beyond the fact that it is fast, lightweight and ultra capable on all sorts of terrain, it's just damned good lookin'. Short-travel trail bike? "Downcountry" rig? Occasional race bike? Whatever, call it what you want to call it. All we know is that this is one hell of a mountain bike. KEY FEATURES - Spark Carbon HMF-Alloy Frame - RockShox Pike Select RL3 130mm Fork - RS Deluxe Select RL3, 120mm, TwinLoc - SRAM NX Eagle 12 Speed - Shimano Disc Brakes - Syncros X-30SE TR Rims - Schwalbe Wicked Will Tires - Syncros Dropper Post and Parts
$2,549.99 - $3,399.99 $3,399.99 Up to 25% Off
When you think of the perfect mountain bike, what comes to mind? For us, it's the all new Spark 960. Why, you ask? Well, beyond the fact that it is fast, lightweight and ultra capable on all sorts of terrain, it's just damned good lookin'. Short-travel trail bike? "Downcountry" rig? Occasional race bike? Whatever, call it what you want to call it. All we know is that this is one hell of a mountain bike. KEY FEATURES - Spark Alloy SL Frame - RockShox Judy 130mm Fork - X-Fusion Nude 5, 120mm, TwinLoc - Shimano XT-Deore 12 Speed - Shimano Disc Brakes - Syncros X-30SE TR Rims - Schwalbe Wicked Will Tires - Syncros Dropper Post and Parts
$2,999.99 - $4,299.99 $3,999.99 - $4,299.99 Up to 25% Off
The Spark RC Comp is the perfect blend of top-notch carbon engineering, never before seen levels of integration, and just the right amount of secret sauce. We wanted to make this platform faster than ever before both up and down the hill. Increasing travel, perfecting geometry, and applying input from the world's best athletes, we've created the cross-country race bike of all cross-country race bikes. If you think fast is fun, then you're going to love this ride. KEY FEATURES - Spark RC Carbon HMF Frame - FOX 32 Float Rhythm 120mm Fork - FOX Float Custom, 120mm, TwinLoc - SRAM NX Eagle 12 Speed - Shimano Deore Disc Brakes - Maxxis Rekon Race Foldable Tires TECHNOLOGIES: EVO-LAP TECHNOLOGY But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without sacrificing the stiffness, comfort or impact resistance. The entire range benefitted from our Evo-Lap technology. ADJUSTABLE HEAD ANGLE With the new Spark, you can adjust the head angle by .6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. EASY SHOCK ACCESS Accessing the shock via the bottom bracket area is facilitated through a hatch. This makes it easy to adjust rebound, compression, shock pressure, and for installing or replacing the cable for our TwinLoc Suspension System. PATENTED INTEGRATED SUSPENSION SYSTEM An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever important one. For the optimal performance of a suspension shock, power transfer must be the most direct possible. What we want to avoid are any inefficient directional movements, in other words, lateral movements (sideways to the direction of travel) as the shock goes through its compression. Having an integrated shock allows us to improve this in several ways. Firstly, the frame construction around the shock and with the trunnion mount can be designed to be much more rigid, reducing movement and fostering more efficient power transfer. We can also add much larger bearings to the seat tube pivot, further reinforcing this area and reducing any unnecessary motion. Our integrated Suspension technology also helps us to engineer frames with a lower shock placement which lowers center of gravity. As a result, the bike benefits from better handling, and a more stable, confidence-inspiring ride for the end user. While these may seem like minor improvements individually, the sum of their parts results in more efficient shock performance. Additionally, the shock is fully protected from any foreign elements. Rainy race? No problem, your shock will continue to perform at its best regardless. REAR AXLE TOOL Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30, and a 6 Allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. SINGLE PIVOT SUSPENSION LAYOUT A full-suspension bike will never have success without, well, good suspension design. From the first time we rode the Spark’s single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark’s suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance.
$3,999.99 $4,999.99 20% Off
The Spark RC Team is the perfect blend of top-notch carbon engineering, never before seen levels of integration, and just the right amount of secret sauce. We wanted to make this platform faster than ever before both up and down the hill. Increasing travel, perfecting geometry, and applying input from the world's best athletes, we've created the cross-country race bike of all cross-country race bikes. If you think fast is fun, then you're going to love this ride. KEY FEATURES - Spark RC Carbon HMF Frame - FOX 34 SC Float Perf. 120mm Fork - FOX Nude 5 EVOL, 120mm, TwinLoc - Shimano XT 12 Speed - Shimano XT Disc Brakes - Maxxis Rekon Race Foldable Tires TECHNOLOGIES: EVO-LAP TECHNOLOGY But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we've optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without sacrificing the stiffness, comfort or impact resistance. The entire range benefitted from our Evo-Lap technology. ADJUSTABLE HEAD ANGLE With the new Spark, you can adjust the head angle by .6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. EASY SHOCK ACCESS Accessing the shock via the bottom bracket area is facilitated through a hatch. This makes it easy to adjust rebound, compression, shock pressure, and for installing or replacing the cable for our TwinLoc Suspension System. PATENTED INTEGRATED SUSPENSION SYSTEM An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever important one. For the optimal performance of a suspension shock, power transfer must be the most direct possible. What we want to avoid are any inefficient directional movements, in other words, lateral movements (sideways to the direction of travel) as the shock goes through its compression. Having an integrated shock allows us to improve this in several ways. Firstly, the frame construction around the shock and with the trunnion mount can be designed to be much more rigid, reducing movement and fostering more efficient power transfer. We can also add much larger bearings to the seat tube pivot, further reinforcing this area and reducing any unnecessary motion. Our integrated Suspension technology also helps us to engineer frames with a lower shock placement which lowers center of gravity. As a result, the bike benefits from better handling, and a more stable, confidence-inspiring ride for the end user. While these may seem like minor improvements individually, the sum of their parts results in more efficient shock performance. Additionally, the shock is fully protected from any foreign elements. Rainy race? No problem, your shock will continue to perform at its best regardless. REAR AXLE TOOL Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30, and a 6 allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. SINGLE PIVOT SUSPENSION LAYOUT A full-suspension bike will never have success without, well, good suspension design. From the first time we rode the Spark's single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark's suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance. Please note that bike specifications are subject to change without prior notice.
$5,849.99 $6,499.99 10% Off
The Spark RC Team Issue is the perfect blend of top-notch carbon engineering, never-before-seen levels of integration, and just the right amount of secret sauce. We wanted to make this platform faster than ever before both up and down the hill. Increasing travel, perfecting geometry, and applying input from the world's best athletes, we've created the cross-country race bike of all cross-country race bikes. If you think fast is fun, then you're going to love this ride. Key Features: - Spark RC Carbon HMF Frame - FOX 34 SC Float Perf. 120mm Fork - FOX Nude 5 EVOL, 120mm, TwinLoc - SRAM GX Eagle AXS Transmission - Shimano XT Disc Brakes - Syncros Silverton 2.0 TR Wheels - Maxxis Rekon Race Foldable Tires - FOX Dropper Post, Syncros CF Parts Technologies: - Evo-Lap technology With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - Adjustable Head Angle The all-new Spark features an easily adjustable head angle. - Easy Shock Access It is very easy to access the shock on the all-new Spark. - Patented Integrated Suspension System An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever-important one. - Rear Axle Tool Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30, and a 6 Allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. - Single Pivot Suspension Layout A full-suspension bike will never have success without, well, a good suspension design. From the first time we rode the Spark’s single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark’s suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance.
$7,699.99 - $10,999.99 $10,999.00 - $10,999.99 Up to 30% Off
KEY FEATURES: - Spark RC Carbon HMX Frame - RockShox SID Ult. RD3 120mm Fork - RS Nude 5 RLC3, 120mm, TwinLoc - SRAM XX SL Eagle AXS Transmission - Shimano XTR Disc Brakes - Syncros Silverton 1.0S Wheels - Maxxis Rekon Race Foldable Tires - FOX Dropper Post, Syncros CF Parts The Spark RC World Cup EVO is the perfect blend of top-notch carbon engineering, never before seen levels of integration and just the right amount of secret sauce. We wanted to make this platform faster than ever before both up and down the hill. Increasing travel, perfecting geometry, and applying input from the world's best athletes, we've created the cross-country race bike of all cross-country race bikes. If you think fast is fun, then you're going to love this ride. Please note that bike specifications are subject to change without prior notice TECHNOLOGIES: ADJUSTABLE HEAD ANGLE With the new Spark, you can adjust the head angle by .6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. EVO-LAP TECHNOLOGY With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology, we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we've optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without sacrificing the stiffness, comfort or impact resistance. The entire range benefitted from our Evo-Lap technology. EASY SHOCK ACCESS Accessing the shock via the bottom bracket area is facilitated through a hatch. This makes it easy to adjust rebound, compression, shock pressure, and for installing or replacing the cable for our TwinLoc Suspension System. PATENTED INTEGRATED SUSPENSION SYSTEM An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever important one. For the optimal performance of a suspension shock, power transfer must be the most direct possible. What we want to avoid are any inefficient directional movements, in other words, lateral movements (sideways to the direction of travel) as the shock goes through its compression. Having an integrated shock allows us to improve this in several ways. Firstly, the frame construction around the shock and with the trunnion mount can be designed to be much more rigid, reducing movement and fostering more efficient power transfer. We can also add much larger bearings to the seat tube pivot, further reinforcing this area and reducing any unnecessary motion. Our integrated Suspension technology also helps us to engineer frames with a lower shock placement which lowers center of gravity. As a result, the bike benefits from better handling, and a more stable, confidence inspiring ride for the end user. While these may seem like minor improvements individually, the sum of their parts results in more efficient shock performance. Additionally, the shock is fully protected from any foreign elements. Rainy race? No problem, your shock will continue to perform at its best regardless. REAR AXLE TOOL Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30 and a 6 allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. SINGLE PIVOT SUSPENSION LAYOUT A full-suspension bike will never have success without, well, good suspension design. From the first time we rode the Spark's single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark's suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance.
$7,999.99 $9,300.00 14% Off
KEY FEATURES: - Spark RC Carbon HMX Frame - RockShox SID Select+ RL3 120mm Fork - RS Nude 5 RL3, 120mm, TwinLoc - SRAM X0 Eagle AXS Transmission - SRAM Level Disc Brakes - Syncros Silverton 1.0 Carbon Wheels - Maxxis Rekon Race Foldable Tires - FOX Dropper Post, Syncros CF Parts The Spark RC World Cup is the perfect blend of top-notch carbon engineering, never before seen levels of integration and just the right amount of secret sauce. We wanted to make this platform faster than ever before both up and down the hill. Increasing travel, perfecting geometry, and applying input from the world's best athletes, we've created the cross country race bike of all cross country race bikes. If you think fast is fun, then you're going to love this ride. Please note that bike specifications are subject to change without prior notice TECHNOLOGIES: ADJUSTABLE HEAD ANGLE With the new Spark, you can adjust the head angle by .6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. EVO-LAP TECHNOLOGY With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology, we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we've optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without sacrificing the stiffness, comfort or impact resistance. The entire range benefitted from our Evo-Lap technology. EASY SHOCK ACCESS Accessing the shock via the bottom bracket area is facilitated through a hatch. This makes it easy to adjust rebound, compression, shock pressure, and for installing or replacing the cable for our TwinLoc Suspension System. PATENTED INTEGRATED SUSPENSION SYSTEM An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever important one. For the optimal performance of a suspension shock, power transfer must be the most direct possible. What we want to avoid are any inefficient directional movements, in other words, lateral movements (sideways to the direction of travel) as the shock goes through its compression. Having an integrated shock allows us to improve this in several ways. Firstly, the frame construction around the shock and with the trunnion mount can be designed to be much more rigid, reducing movement and fostering more efficient power transfer. We can also add much larger bearings to the seat tube pivot, further reinforcing this area and reducing any unnecessary motion. Our integrated Suspension technology also helps us to engineer frames with a lower shock placement which lowers center of gravity. As a result, the bike benefits from better handling, and a more stable, confidence inspiring ride for the end user. While these may seem like minor improvements individually, the sum of their parts results in more efficient shock performance. Additionally, the shock is fully protected from any foreign elements. Rainy race? No problem, your shock will continue to perform at its best regardless. REAR AXLE TOOL Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30 and a 6 allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. SINGLE PIVOT SUSPENSION LAYOUT A full-suspension bike will never have success without, well, good suspension design. From the first time we rode the Spark's single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark's suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance.
$1,649.99
The SCOTT Voltage YZ 0.1 is our Pro riders replica bike built around a high-end Alloy dirtjump frame. Equipped with ultrashort adjustable chainstays, a tapered headtube, and high-end components, this bike is perfect for hitting the pumptrack, the dirtjumps, or jibbin' through the streets. Key Features - Voltage Alloy Frame - X-Fusion Slant DJ 100mm - Singlespeed Drivetrain - Tektro HDM275 Disc brakes - Kenda K-RAD 26 x 2.3" Tires
$1,799.99 $2,300.00 22% Off
Nothing is off-limits to the Embolden, a trail bike designed to conquer tricky climbs, rowdy descents, and chunky rock gardens with confidence.
$4,500.00 - $6,099.00 $6,099.00 Up to 26% Off
Our 140mm/150mm travel Primer 29 trail bike is pure perfection…everywhere. Rolling on super-fast 29" wheels, the Primer 29 will give you trail-flattening speed over any obstacle, both on tough climbs and technical descents. In short, the Primer 29 is the ultimate all-around premium trail bike. It could be the only mountain bike you'll ever need. The Primer 29 trail bike is the most versatile model in our range. With 140mm of rear travel and 150mm up front, we have designed a bike that is capable and balanced off road, but also nimble and fun at the same time. The Primer is a bike that is equally at home on long all-day rides, laps in your local woods, or multi-day adventures. It gives a confidence-inspiring trail ride and is the ultimate all-rounder. The frame is the heart and soul of any bike, and all of our Primers are built around our perfectly designed monocoque carbon frame, with a dual-strut design rear triangle, optimized carbon fiber layup, a carbon top link, titanium hardware throughout, and internal (and silent) tubes for shifter, dropper post, and brake routing. Additional features include ISCG05 mounts, Flak guard armor frame protection on the downtube, a threaded bottom bracket shell, and our adjustable 'Flip Chip' technology.
$4,500.00 - $6,299.00 $6,299.00 Up to 29% Off
Our high spec Primer S is pure trail bike perfection…everywhere. Rolling on super-fast 29” wheels, the Primer S will give you aggressive yet efficient trail-flattening speed over any obstacle, both on tough climbs and technical descents. In short, the Primer S is the ultimate all-around premium trail bike. It could be the only mountain bike you'll ever need. The Primer S trail bike is the highest spec'd model in the Primer range. We've teamed up with legendary Swedish suspension specialists Ohlins to provide you with 140mm of rear travel and 150mm up front via their awesome TTX22M coil shock and RFX 36 M.2 air fork. The Primer S build is similar in many ways to the Primer 29 Pro, except that we have swapped out a few choice components just for you. It's a quality package. With the Primer S, we have designed a bike that is capable and balanced off road, but also nimble and fun at the same time. The Primer S is a bike that is equally at home on long all-day rides, laps in your local woods, or multi-day adventures. It gives a confidence-inspiring trail ride and is the ultimate all-rounder. The frame is the heart and soul of any bike, and all of our Primers are built around our perfectly designed monocoque carbon frame with a dual-strut design rear triangle, optimized carbon fiber layup, a carbon top link, titanium hardware throughout, and internal (and silent) tubes for shifter, dropper post, and brake routing. Additional features include ISCG05 mounts, Flak guard armor frame protection on the downtube, a threaded bottom bracket shell, and our adjustable 'Flip Chip' technology.
$5,999.99 $9,999.99 40% Off
FRO: FOR RACING ONLY. The Sniper FRO has one purpose – to race. Built on the progressive Sniper XC frame we've set out to build one of the lightest production full-suspension XC bikes on the market. Featuring the new Rockshox Sid SL Ultimate Fork, Sid Luxe Ultimate RL shock and a full SRAM AXS XX1 drivetrain, the Sniper FRO is ready to leave it all out on the race course.
$2,249.99 $3,999.99 Up to 44% Off
With the Sniper T we have created a pure full-suspension cross-country trail bike with a true INTENSE spirit. With the same soul as its sibling the Sniper XC, it features a super lightweight full carbon frame, rolling on 29" wheels, with progressive XC trail geometry but this time with 120mm of travel. The extra 20mm of suspension means that the Sniper T is still all about off-road speed…both up and down, but that you get a slightly plusher ride. It is fast, fiery, and fun, and a truly innovative XC trail bike…INTENSE style. It's all about the geometry. Long, low, and slack is no longer just for the downhill crowd, it's the 'new normal' for XC trail bikes too…it's really a game-changer. We believe that short-travel bikes should descend like their long-travel siblings, so with the Sniper T, we've created an XC trail bike with an aggressive DH spirit. It loves going uphill, but it always has one eye on the descents. A longer top tube, shorter stem, wider bars, lower bottom bracket, and slacker head angle all make for an exciting yet balanced bike. It is a complete system that is designed to work as one. The Sniper T's numbers are progressive, with geometry and design that's normally only seen on trail or enduro bikes…but it works. With sharp and crisp handling, and responsive pedaling, it is confident and efficient on the climbs—and with its extra travel, it is now even more stable, controlled, and direct on the descents. Add into that mix dropper posts and 1x12 gearing and you have what we believe to be the ultimate cross-country trail bike. We know that riding the Sniper T will fill you with confidence. Climbing, descending, or cruising along…it does it all with a powerful yet efficient ease. The way the Sniper covers the ground so quickly and effortlessly is inspiring and it is nothing short of a revelation on the descents. The Sniper T is our trail bike thrasher, and it's got the INTENSE spirit through and through. Sitting in the middle ground between a full-on XC bike (Sniper XC) and a slightly longer travel trail bike (Primer) the Sniper T offers the best of both worlds. You won't be disappointed. It's everything you could want in a modern-day cross-country trail bike.
$2,600.00
SMALL BUT MIGHTY, THIS HIGHLY CAPABLE TRAIL BIKE IS FOR LITTLE RIPPERS WITH BIG AMBITIONS. ITS LIGHTWEIGHT ALLOY FRAME, HIGH-PERFORMANCE WHEELS, AND YOUTH-TUNED SUSPENSION BALANCE EFFICIENT CLIMBING, LOADS OF TRACTION, AND CONFIDENT HANDLING TO HELP YOUNG TRAIL RIDERS TAKE IT TO THE NEXT LEVEL. KEY PERFORMANCE FACTORS YOUTH-TUNED SUSPENSION FlexPoint rear suspension with a Giant Crest FloTrac Lite shock delivers 135mm of smooth travel tuned specifically for lighter weight riders. Up front, the 140mm Giant Crest SL FloTune Lite fork handles rocks, roots and ruts. Front and rear suspension both have minimal activation force, giving young riders smooth control and confidence on technical trails. AGILE AND EFFICIENT An ALUXX SL aluminum frameset with youth-specific trail geometry is combined with quality lightweight components to minimize weight and help young riders tackle challenging terrain. A new Giant TRA WheelSystem (27.5-inch front/26-inch rear) borrows key technologies from the proven adult TRA WheelSystem for improved climbing capabilities and quicker acceleration. OFF-ROAD CONTROL TRA WheelSystem with WideGuard technology results in lighter, stronger rims so riders can run lower tire pressures for better traction without the risk of tire punctures or rim damage. The mixed wheel setup combines the agile handling of the 26-inch rear wheel with the improved rollover capabilities of the 27.5-inch front, while a dropper seatpost makes it easy to optimize riding position while climbing or descending. Front Wheel: 27.5-inch Rear Whell: 26-inch
$2,519.99 - $3,600.00 $3,600.00 Up to 30% Off
Steep drops, blind lines, chunky singletrack through roots and rocks. This fierce 29er helps you tame the wildest enduro terrain with smooth suspension and confident handling. From the bike park to weekend enduros, daily trail sessions to rowdy backcountry adventures, this full-suspension 29er is ready for action. With a lightweight, strong, and dependable ALUXX SL frameset, Reign 29 helps you conquer climbs and rail rugged descents with more confidence and control. It’s engineered with progressive geometry that’s optimized for its 29-inch wheels. That means shorter chainstays, a longer toptube, and headtube/seattube angles that put you in the perfect position to slay all types of singletrack. The updated Maestro suspension gives you 146mm of smooth, active rear travel that features a trunnion mount shock and Advanced Forged Composite rocker arm. Add in a host of other aggressive trail riding technologies, including a cleanly routed dropper seatpost and the latest Giant WheelSystem with Boost hub spacing and tubeless tires, and it’s ready to rip when you are. Race-bred suspension Maestro rear suspension developed and tested under extreme conditions of Enduro World Series races. The trunnion mount shock has a longer stroke and smoother feel, and the Advanced Forged Composite upper rocker arm adds stiffness while lowering overall frame weight. Progressive enduro geometry The frameset features enduro-ready geometry so you can ride aggressive descents and rail corners with confidence. The 64.56/76.36-degree headtube/seattube angles with a 170mm travel, 42mm fork offset produce confident front-end handling with high-speed stability and control. 29er confidence and control Larger 29-inch diameter wheels roll over rugged enduro terrain with improved balance and stability, giving you the momentum to crank up tough climbs and the confidence to fly on fast, technical descents.
$1,200.00
Make the world your playground with STP. A longtime favorite for dirt jumping, street shredding and whatever style you dream up, it’s powered by a lightweight, super-strong frame and responsive 26-inch wheels. Key Performance Factors Trail-inspired geometry Lightweight, durable aluminum frameset with a longer top tube, tighter rear triangle and slacker head angle for agile handling on dirt jumps, trail or street sessions. Quick and responsive Frame geometry is designed for 26-inch wheels with a low saddle height and taller front end for quick, confident ride quality. Maximum control Powerful disc brakes and 120mm suspension fork with remote lockout put maximum control in the rider’s hands. Grippy, high-volume 26-inch tires are optimal for streets, trail or park riding.
$1,150.00
Make the world your playground with STP. A longtime favorite for dirt jumping, street shredding, and whatever style you dream up, it's powered by a lightweight super-strong frame and responsive 26-inch wheels. KEY PERFORMANCE FACTORS - Trail-inspired geometry Lightweight, durable aluminum frameset with a longer top tube, tighter rear triangle, and slacker head angle for agile handling on dirt jumps, trail, or street sessions. - Quick and responsive Frame geometry is designed for 26-inch wheels with a low saddle height and taller front end for quick, confident ride quality. - Maximum control Powerful disc brakes and 120mm suspension fork with remote lockout put maximum control in the rider’s hands. Grippy, high-volume 26-inch tires are optimal for streets, trail or park riding. - ALUXX Aluminum Technology This Performance level frame material features 6061 alloy with single-butted tubes to produce strong, lightweight framesets for a variety of different bikes and riding styles.
$1,100.00
MAKE THE WORLD YOUR PLAYGROUND WITH STP, A FAVORITE FOR DIRT JUMPING, STREET SHREDDING AND WHATEVER STYLE YOU DREAM UP. KEY PERFORMANCE FACTORS Trail-inspired geometry Lightweight, durable aluminum frameset with a longer top tube, tighter rear triangle and slacker head angle for agile handling on dirt jumps, trail or street sessions. Quick and responsive Frame geometry is designed for 26-inch wheels with a low saddle height and taller front end for quick, confident ride quality. Maximum control Powerful disc brakes and 120mm suspension fork with remote lockout put maximum control in the rider's hands. Grippy, high-volume 26-inch tires for streets, trail or park riding.
Page 1 of 3 Next page