Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Stems

Zipp Service Course SL Stem
$111.99
Zipp's Service Course SL Stem provides strength and reliability at just 120 grams. Forged of 7075 aluminum with titanium bolts, the SL is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.
Syntace Force 109
$99.00
From road to mountain, Syntace's Force 109 stem offers a variety of lengths in a 6° rise with thoughtfully engineered features. It's oversized stem tube diameter offers increased stiffness, and titanium bolts shed unecessary weight. A 200 degree clamp face helps increase handlebar strength and fatigue life. - Stack height: 38.5mm - Weight: 118g (110mm)
Syncros RR1.0 Aero Bar/Stem 420
$549.90
RR1.0 Aero are crafted from high modulus carbon fiber to ensure precise steering in a lightweight, race-worthy design. The all-in-one combo offers clean lines from the drop to the steerer clamping area. The optimized carbon layup eliminates harsh road vibrations and reduces stress hotspots. The ergonomic bend provides you comfortable hand positions to mitigate fatigue keeping you both confident and in control. - Designed to be perfectly integrated with the new Scott Foil bike - Aero top section with compact drop and reach - Full cable and wire integration - Integrated accessory mounting threads - Stem Angle: 84 degree - Material: Carbon monocoque with forged alloy steerer
Syncros RR1.5 Stem
$49.99
RR1.5 stems are designed with a low stack height and negative rise for road bikers looking to lower their handlebar position. They are made of high-grade aluminum to achieve the perfect balance of strength, stiffness and low weight. The body is 3D forged from an advanced 7075 alloy and the broad four-bolt faceplate design better distributes stress and lowers the clamping force required to secure the handlebar. - Designed for road use, but also suitable for mountain use - Forged and machined AL2014 body - 4-bolt face plate helps distribute clamping load - Corrosion-resistant Torx T25 steel bolts - Compatible with all 31.8 bars - 1 1/8" steerer - Includes stem top cap and bolt
Race Face Ride XC Stem
$29.99
Race Face's Ride stem is designed specifically for riders looking for Race Face engineering and quality at a value price point. - Forged and shot peened from 6061 aluminum for high strength and fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Machined logo on bar clamp
Race Face Turbine 35 Stem
$99.99
- Intended for XC, Trail and All Mountain use - Machined to precision with 7075 aluminum for high strength & fatigue resistance at a very light weight - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Bar Clamp Diameter: 35mm - Stem Angle: -84 deg , +96 deg
Profile Design 1/ZeroSeven Stem
$57.99
Profile Design's 1/ZeroSeven Stem combines 3D-forged aluminum with the security of a four-bolt faceplate for low weight and exceptional stiffness, all in a simple, elegant design. It offers a 7-degree rise and can be installed in either the positive or negative position.
Pro Vibe Stem
$199.99
Some might call it magic—PRO likes to refer to it as co-creation: aligning all forces to work in favor of you. The PRO Vibe Stem is designed to align your cockpit perfectly with your bike for an optimal riding position. Supreme stiffness offers you more control during those high-speed descents or maneuvers. It's also developed for ultimate integration with Di2 to give you maximum aerodynamic performance and ultra-clean styling. With the specially positioned cable ports, you can internally route Shimano Di2 cables. All of the advantages of Di2, with none of the cables showing. Align yourself with performance—use the PRO Vibe Stem. - Anodized AL-7075 - Shimano DI2 integration - Lightweight titanium bolts - Integrated topcap
Giant Contact SL OD2 Stem
$90.00 - $100.00
• 3D forged 2014 aluminum alloy with oversized box cross-section • Oversized 46mm wide 6061 alloy faceplate • Titanium hardware • ± 8° rise requires fewer spacers • 1-1/8" steerer adapter included • Weight: 145 grams (100mm)
Dimension 31.8mm Threadless Stem
$29.99 - $35.00
Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g
Dimension Trail Stem 31.8
$30.00 - $35.00
For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
Zipp SL Speed Stem
$265.00
Zipp’s SL Speed stem represents the essence of carbon componentry. It’s stiff, secure, and lightweight with a sleek design that complements any bike. It’s a perfect addition to a mountain climber’s favorite feather-light road bike, but it’s tough enough to tackle gravel and cyclocross. - Includes stiff aluminum faceplate and titanium hardware - Torx T25 heads for precise torque readings and ease of adjustment - Stack height: 41mm
Zipp SL Sprint Stem
$265.00
Just as cyclists maximize performance by being as light, but as powerful as possible, Zipp's SL Sprint Stem strikes the ideal balance of stiffness and lightweight to deliver responsive handling without wasting a single watt. - Unidirectional carbon - The SL Sprint comes with its own stem cap that’s designed to be aerodynamically efficient by blending into the stem body - Includes stiff aluminum faceplate and stainless steel hardware with TORX heads on all bolts for precision torque readings and ease of adjustment - Black matte carbon finish with white Zipp logos
Zipp Service Course SL-OS Stem
$132.00
Zipp's Service Course SL-OS Stem provides lightweight strength and versatility to help you achieve the perfect riding position. At only 140 grams, the Service Course keeps your rig light while maintaining toughness for the long haul. Change the angle of the stem quickly and easily with the included shim that lets you tailor your comfort even more. And, the Service Course works with both 1 1/8-inch steerers and 1 1/4-inch. • Included shims allow the stem's rise to be adjusted to 4°, 6°, or 8° angles.
Zipp Service Course Stem
$56.00
Zipp's Service Course Stem is strong, light, and reliable. Forged of 7075 aluminum with stainless steel bolts, the Service Course is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.
Zipp Service Course Stem
$56.00
On today’s road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored color is available on the Zipp Service Course stem. Since the introduction of our line of Service Course and Service Course SL components, we’ve had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering methods, we are proud to introduce our completely redesigned line of Service Course and Service Course SL stems. - Class-leading stiffness-to-weight ratio - More options for a better fit - New faceplate and geometry for greater stiffness and easier installation - Distinctive silver finish
Whisky Parts Co. No. 7 Stem
$40.00 - $45.00
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
Velo Orange Tall-Stack Stem
$40.00
Save your steerer tube and eliminate headset spacers with the Velo Orange Tall-Stack alloy stem. It gives your bike's cockpit a nice clean look. Available in Polished or Black, the 17-degree angle allows the stem to be level on most modern frames. And, you can use handlebar clamp shims to adapt to smaller handlebar clamp diameters, if you like. - Stack height: 75mm - Not recommended for use with carbon steerer tubes
TruVativ Descendant Boxxer Stem
$75.00
Built strong to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Direct mount stem gives DH riders lower more aggressive position - Super-stiff, stable front-end handling - Lightweight - Two-piece design - Designed to pair with BoXXer fork
Thomson Elite X2 Road Stem
$114.95
Thomson's Elite X2 Road Stem is instantly recognizable because of Thomson's legendary style, and with strength to spare, this stem is more than just a pretty face. Made from a solid, one-piece block of 7000-series aluminum, the X2 combines exceptional strength with light weight for a stiff stem and total control on all your rides. It has a two-bolt clamp design that's just as strong as four-bolt designs thanks to Thomson's interlocking interface and it also cuts down on the weight. Plus, the stem's low 36mm stack height gives you more options for customizing your position. And, thanks to their reversible graphics, your X2 looks great whether you run a positive or negative rise.
Thomson Elite X4 Mountain Stem
$114.95
The Elite X4 Mountain Stem is instantly recognizable because of Thomson's legendary style, and with strength to spare, this stem is more than just a pretty face. Made from a solid, one-piece block of 7000-series aluminum, the X4 combines exceptional strength with light weight for durable, solid steering control to tame the toughest trails. It has a four-bolt clamp design and reversible graphics, so your X4 looks great whichever way you run it.
Syntace Flatforce Stem
$119.00 - $139.00
The Syntace Flatforce stem utilizes a 12mm drop for all length options, allowing riders to keep their MTB handlebars in a lower riding position. - 200° clamp face increases handlebar strength and fatigue life - 42mm wide bar clamp for increased handlebar support - Super-low handlebar position solution for unique fit requirements - Sabertooth bar clamp design insures no bolts or clamping surfaces protrude - Stack Height: 27mm
Syncros Creston iC SL Bar/Stem
$549.99
The Syncros Creston iC is the ultimate in terms of integration on the road. Clean and uncluttered our new Syncros combo cockpit allows us to route all the cables completely internally through the bar, headset and into the frame as part of SCOTT’s new ICC routing. - Carbon UD, Superlight Layup - Compact Bend 75mm/125mm Reach/Drop - Clamp Diameter: iC (integrated Cockpit) - Steerer Diameter: 1-1/4" for Scott Addict RC MY20 - Weight: 280g
Syncros DH1.5 Stem
$89.99
The Syncros DH1.5 direct-mount stem is made to do anything from blasting berms in the park to sending the gnarliest World Cup Downhill track. The stem is 3D-forged of high-grade 6061 alloy for ultimate strength and the 35.0mm clamp provides a rock-solid hold on your handlebar. - Material: Alloy AL7075 - Weight: 135 grams
Syncros FL1.5 Stem
$49.99
FL1.5 stems are designed with a low stack height and negative rise for mountain bikers looking for a low handlebar position. The optimized aluminum construction achieves the perfect balance of strength, stiffness, and weight. 3D forged from 7075 alloy and a broad four-bolt faceplate design creates a better distribution of stress and lowers the clamping force required to secure the handlebar. - Designed for mountain use - Forged and machined AL2014 body - 4-bolt face plate helps distribute clamping load - Corrosion-resistant Torx T25 steel bolts - Compatible with all 31.8 bars - 1 1/8" steerer - Includes stem top cap and bolt - Lengths: 50-90mm - Angle: 6° flip-flop
Syncros FL2.0 Stem
$39.99
FL2.0 stems are designed to suit the more price conscious road or mountain biker. The stems are 3D forged from an advanced 6061 alloy to achieve the perfect balance of strength, stiffness, and weight, while the broad four-bolt faceplate design better distributes stress and lowers the clamping force required to secure the handlebar.
Syncros Fraser iC SL Handlebar
$329.90
Our one-piece cross country handlebar/stem combo is the ultimate in lightweight for the discerning XC rider. Based on our popular T-bar flat handlebar and a -8° stem in 3 different virtual extension options our carbon engineers have been able to make a considerable weight saving with the same performance. - XC World Cup level carbon bar - One piece construction. - Syncros Engineered Carbon Construction - Additional sanding on grip/lever area help to reduce clamping forces - Integrated stem -8° - Flat T-Bar shape - 9° back sweep, 6° up sweep - Width: 740mm
Syncros Fraser iC SL SE Bar/Stem
$449.99
A variant of our Fraser iC SL Special Edition, this version has a less extreme stem angle as preferred by Andri Frischnecht of the Scott-SRAM team. The stem has a minus 17 degree rise, 740mm width and our T-bar geometry with the weight savings and stiffness benefits that come from producing the bar and stem in one piece. This is a limited edition of the Fraser iC SL. - XC World Cup level carbon bar - Syncros Engineered Carbon Construction - Additional sanding on grip/lever area help to reduce clamping forces - Integrated stem: -17° - Flat T-Bar shape - 9° back sweep, 6° up sweep - Width: 740mm - Steerer Diameter: 1-1/8" - Clamp Diameter: iC (integrated Cockpit) - Carbon UD, Superlight Layup
Syncros Fraser iC SL Special Edition Handlebar
$449.99
Ridden by the best, our Fraser edition is designed according to the preferred geometry of the World and Olympic Champion. The stem has a minus 25-degree rise and our T-bar geometry with the weight savings that come from producing the bar and stem in one piece. This is a limited edition of the Fraser iC SL. - XC World Cup level carbon bar - One piece construction - Syncros Engineered Carbon Construction - Additional sanding on grip/lever area help to reduce clamping forces - Integrated stem -25° - Flat T-Bar shape - 9° back sweep, 6° up sweep - Width: 740mm
Syncros Hixon iC DH 800mm Bar/Stem
$349.99
For 2020 we took our iC (integrated Cockpit) concept and applied it to downhill to produce a light, stiff and strong one piece cockpit for the ultimate in downhill speed. At 300g in 800mm width it's not only one of the lightest bars available, but integrating the stem removes a huge amount of weight from the bike while the one-piece construction allows us to reinforce key areas to inspire confidence where it is needed. Our carbon engineers worked on the layup to find the perfect balance of stiffness, not too harsh, not too soft, but just right. - Carbon UD - Up Sweep: 5° up - Back Sweep: 8° back - 15mm Rise - Clamp Diameter: iC (integrated Cockpit) - Steerer Diameter: 1-1/8" - Weight: 300g
Page 1 of 4 Next page