Grips

Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance.

Keep your bike looking good with SRAM's HydroR Lever Hoods. They're made of a soft, grippy rubber and are a great replacement hood for HydroR levers.

Race Face Half Nelson Lock-On Grips • Super-slim profile • Race Face MX style half waffle for extra grip security • Topographical moisture channels • Compatible with ODI lock jaw clamps

Oury single compound grips. Simple & classic. - Soft grips with raised blocks - Flange: No - Lock On: No - Grip Shift Specific: No - Length: 135mm - Shape: Round - Weight: 122g

Our initial partnership with Aaron Gwin produced numerous innovations that pushed grip technology to new levels. With the new AG2 Grips, we wanted to take things even further. We started with an ultra-soft pro compound and built it into an improved knurl pattern that provides extra tackiness and control along with reduced vibration transfer. We coupled this with our exclusive offset design that offers even more impact dampening where it is needed most, without increasing the grip diameter. We then redesigned the most impact-prone portions of the grips to provide an even better feel and accurate control when riding. - Grips feature a larger diameter than the original grips (30.5mm) with offset padding towards the rider for improved comfort - Soft Pro compound provides excellent shock absorption - Redesigned surface pattern for improved traction and vibration dampening - Redesigned ends provide an improved feel - Provide extra durability against grip blowout - Thin ribs add control without a bulky feel - Uses our race-proven Version 2.1 Lock-On system - Molded over the aluminum endcap, the end provides durability but will not gouge

ODI’s first generation Lock-On System are standard for mountain bike racers everywhere. ODI has redefined grip performance again. The new Elite Series grips are engineered from end to end to deliver every feature racers demand. - Offset grip design provides padding where it is needed most - Variable knurl pattern provides comfort/traction where you need it most - Version 2.1 Lock-On System - Soft Pro compound for excellent shock absorption - Reinforced soft ends for added durability - Super slim profile

- Aluminum clamps secure the grip on both ends using a hex wrench - Loosen pinch bolts and grips slide on or off with ease - 130mm length for standard shift/brake setup (not for twist shifters, use 90mm replacement grip options for twist shifters)

More support with more comfort Why not combine the best? With the GA3, the winged grip has proven its genius to the All-Mountain world. The special thing about the GP1's off-road cousin is, he locks on tight with a lightweight inner clamp. The concept combines all the relief benefits of the wing and actively supports your wrist. Your freedom of movement and the accompanying bike control remains fully intact. Riding pleasure guaranteed! What exactly are the benefits of the wings on the grips? The longer a ride is, the harder it is for a rider to maintain the ergonomically correct hand position on the bike. As a result, riders often bend their wrists too much, stressing nerves and tendons and inhibiting blood circulation. Numbness and pain in your hands are often the undesirable consequences. The GA3 grip optimizes the hand position through the Miniwings and prevents over-bending in your wrist. What is the carpal tunnel? The carpal tunnel is an anatomic passage in your wrist for nerves and tendons running from the lower arm to the hand. If the wrist is bent too much the nerves become constricted, which often leads to pain and numbness. The GA3 with Miniwing is based on the well-established and proven design of the MTB-specific GA2 grips. The particular shape of the grips provides you with great comfort and grip, without compromising the freedom of movement. This allows you to have all the control you need to tackle the most demanding of trails with full confidence. As an ergonomically perfected expansion of the GA-series by Ergon, the primary purpose GA3 grips is to provide relief out in the trail. But, they're not only perfect for the MTB category, they are also ideal on fitness-oriented and urban bikes. The ergonomic winged-grip GA3 is available in five striking colors. Ergon grips don't just feel great, they look great, too!

Recommended for grip shift and riders looking for the best shock absorbing grip in the industry. 60 grams, standard grip length - 5 1/8", installed DIA. 32mm, weight plus or minus 5%, 1 set of bar plugs included. - 60 Grams - Standard Grip Length – 5 1/8" - 32mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation

The ESI Extra Chunky grips are the thickest available. 80 grams, standard grip length - 5 1/8", installed DIA. 34 mm, weight plus or minus 5%, 1 set of bar plugs included. - 80 Grams - Standard Grip Length – 5 1/8" - Installed Dia. 34mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation

Fat Paw grips were developed for riders who crave large-diameter grips that also have a soft feel. The 9.5mm grip thickness reduces hand fatigue and finger numbness, making it an ideal option for riders with large or gloved hands. - 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability - Tacky texture provides excellent grip with or without gloves in all weather conditions - Includes bar end plugs

WTB's Dual Compound grips are perfect for XC, trail and comfort riding. They feature plush outer gel and tight, twist-resistant bases for comfort and control. And, the linked, diamond-shaped WTB logos and slightly raised centers provide an ergonomic feel and maximum grip in tough conditions.

WTB's Original Trail grips are ideal for XC, trail, and city riding. With their smooth, octagonal shape, DNA rubber compound and small flanges, the Originals are comfortable enough for lunch-hour loops and all-day epics.

The Tech Trail Clamp-Ons combine WTB’s Clamp-On technology with a slim, 30-millimeter profile ideal for smaller hands. The small knobs and DNA rubber gives you good grip while being easy on the hands. Dual clamps keep installation and removal simple and resist twisting and slipping too.

WTB's Technical Trails feature built-in zip-tie channels to keep them stable in sloppy conditions. And, these slim grips are easy to cut and are compatible with trigger and grip shifters.

- Large blocks of conforming rubber cover the entirety of the Wafel grip, while ample spacing allows them to smush independently for increased grip while also providing an exit channel for muck and water - 130mm length and 30mm diameter is good for hands of all sizes - Single lock on clamp holds the grip firmly in place

Insane performance packed into just 9 grams. This is the world’s lightest high-performance grip and lives up to the hype. If weight savings is for you, then these are your grips! - Material: SupaLite Foam - Diameter: 32mm - Length: 130mm - UV Resistant - Latex-free

Sunday's Cornerstone Grips rock traditional styling, current branding, and come in at 150mm in length with plenty of color options. It's not a bad idea to keep an extra pair around.

The product designers at Sunday worked closely with Jake to nail down a grip that is perfect for him. Jake's grip comes in at 160mm and features a gradually increasing rib width. This grip can be run either way, depending on which side you prefer. The grip also features a tapered core for comfort.

The Team grip was designed by our team riders who wanted a wider, more comfortable grip for big bars and brakeless riders. Vortex PC Bar Plugz are included. - Designed by Stolen Team riders - Includes color-matched Vortex PC Bar Plugz - Length: 165mm - Diameter: 31mm - Weight: 4.3-ounces per pair

- A totally new grip designed from the ground up to give you more control and comfort then ever before! - Single lock ring design and smooth thumb zone. - Reinforced bar end area - Anatomical bar end design supports and protects the little finger - Cut outs improve impulse shock, vibration absorption and comfort - Interlocking columns support low profile fins to create a tread pattern which offers the benefits of both a finned grip and a low profile - Features: Single lock grip, low profile 30mm diameter, tapered bar ends, Spank 'Human Factor' grip pattern. - Material: Rubber, alloy clamp, plastic base, steel bolt - Length (mm): 145 - Diameter (mm): 30 - Weight (g): ±115g / Pair

- A totally new grip designed from the ground up to give you more control and comfort then ever before! - Single lock ring design and smooth thumb zone. - Reinforced bar end area - Anatomical bar end design supports and protects the little finger - Cut outs improve impulse shock, vibration absorption and comfort - Interlocking columns support low profile fins to create a tread pattern which offers the benefits of both a finned grip and a low profile - Features: Single lock grip, low profile 30mm diameter, tapered bar ends, Spank 'Human Factor' grip pattern. - Material: Rubber, alloy clamp, plastic base, steel bolt - Length (mm): 145 - Diameter (mm): 33 - Weight (g): ±115g / Pair

Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance. They fit RED 22, Force 22 and RED 10-speed ErgoDynamic shifters.

Customize your handlebars with new end plugs. Compatible with MTB and Road, carbon and aluminum.

• Replacement locking handlebar grip sets for X0 and XX Grip Shift • Available in 100mm and short length 85mm shifter with interlocking Grip Shift interface and single bolt clamp. • Available in full-length 122mm grips with dual locking bolt clamps. • Available in black and silver.

SRAM Racing Grips offer a great grip for total control and come in several sizes to fit your front-end setup. These durable rubber grips have stylish logos stamped in them and are built to last and not slip.

- Clear, gel pads provide added shock absorption while positioned between the lever hood and top-handlebar transition under handlebar tape - Two, left and right sets with integrated channels for either inside or outside, under tape cable routing

- 1-piece, integrated Lock-On grip. - Exclusively fits 19mm bar ends. - Dual Density Design. - Smaller 25-26mm outer diameter. - Smaller 115mm length. - Tapered and slotted core to eliminate slippage. - Plush SDG Icon pattern for superior grip control and vibration dampening.

- Dual Density Design - Integrated, 1pc Lock-On - Tapered Inner Core – prevents slippage - Mushrooms for ultimate comfort - Ergonomically ramped and undercut grabbers for superior grip - Ovalized design for ultimate comfort and control - Circular Iconic dampers - Flared outer ends

- Dual Density Design - Integrated, 1pc Lock-On - Tapered Inner Core – prevents slippage - Mushrooms for ultimate comfort - Ergonomically ramped and undercut grabbers for superior grip - Ovalized design for ultimate comfort and control - Circular Iconic dampers - Flared outer ends