Tools

Say goodbye to jumbled drawers and crowded bit holders. The JH-3 keeps your bits, sockets, and other tools well-organized and within reach, with three rows of moveable bit holders to fit up to 45 tools with 3/8" drive fittings. Precision-cut openings along the back allow for convenient storage of torque wrenches, drivers, and ratchets. Integrated mounting holes allow for straightforward installation on pegboard or any solid surface. - Assembled dimensions: 14" x 5.8" x 6.2" (356 x 148 x 158 mm) - Mounting holes are 10" (25.4 mm) from center to center - Mounting hardware not included - Durable powder-coated steel construction

The BKD-1.2 Hydraulic Brake Bleed Kit will bleed most models of DOT fluid-based hydraulic disc brakes, including models made by SRAM®, Formula®, Hayes®, and Hope®. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance. The BKD-1.2 is built for the rigors of daily commercial use and includes two syringes, hoses with shutoff clips, multi-size bleed blocks, and a set of our unique mountable syringe holders, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case. Includes: - Two 20 mL syringes Two hose assemblies with shutoff clips - Two 10 mm/12 mm universal bleed blocks - Two 11 mm bleed blocks for Hayes® systems -  Two adjustable syringe holders -  M5 x 0.8 adapters— SRAM® (x2) -  M6 x 1.0 adapter— universal (x2) - Bleeding Edge-specific fitting — SRAM® -  Hose compression sleeve — universal -  Set of spare O-rings and hose -  Replacement parts available -  Brake fluid not included NOTE: The BKD-1.2 is for DOT fluid-based hydraulic bicycle brake systems only. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure. For mineral oil brake systems use the Park Tool BKM-1.2 Hydraulic Brake Bleed Kit — Mineral Oil.

The Park Tool FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs. -Utilizes a 12mm guide pin to stabilize the tool during use - Fits 12-spline cassette lockrings from Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and others (23.5mm diameter) - Fits some Shimano and similar disc brake rotor lockrings

Park Tool's Shop Scissors are shop quality with sturdy, stainless steel blades and a dual-density grip. They're perfect for a wide range of mechanic's duties including cutting zip-ties, boxes, bar tape, and handle grips.

High-quality L-key set out of stainless steel for hexagon socket screws by Wera. The Hex-Plus profile offers a greater contact surface in the head of the screw; the notching effect is therefore reduced to a minimum and damage to the screw head is more or less eliminated. Comes with hex ballpoint on the long arm: the ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. - Stainless steel prevents the transfer of extraneous rust: fasten stainless screws with stainless tools - Hex-Plus allows socket head screws to live longer - With Take-it-easy tool finder: color coding by size - Wear-resistant clip material for enhanced durability - Color-coded, easy-to-grip plastic sleeve, even at low temperatures - Comes in an almost wear-free L-key clip fastener

Park's Crank Puller is for removing crankarms on Shimano's splined, oversize, pipe-billet bottom brackets. It employs a long handle and a fine thread for the leverage and torque needed to remove tight arms. Park's unique rotating tip ensures smooth operation and long life. (The CCP-44 does not fit standard square or tapered bottom brackets.)

The Magnetic Parts Bowl is the ideal solution for keeping track of small metal parts. It's 6 inches in diameter and featues an extra-strong magnet so bearings, cones and springs stay put and you don't lose them.

Park Tool's Fork Threading Set is designed for cutting new threads and for chasing existing threads on fork columns that are not chromed. The FTS-1's expandable cutting dies are made from the highest quality high-speed steel for precision cutting and long life. The unique thread guide system used with the FTS-1 is specially designed to allow the metal chips and shavings that result during use to fall completely through the guide, preventing damage to the fork threads and the tool. The FTS-1 includes: • Die handles • 1" x 24 tpi cutting die (Part #606) • 1" cutting guide (Part #610) Accessory dies and guides are also available separately: • 1-1/8" x 26 die (Part #607) • 1-1/8" guide (Part #611) • 1-1/4" x 26 die (Part #608) • 1-1/4" guide (Part #612) Die handles fit all three sizes of dies and guides.

Park Tool's Right Hand Bottom Bracket Tap is a replacement tap for their BTS-1 Bottom Bracket Tap Set (sold separately). This tap is used on the non-drive or left side of the bike, which uses a clockwise or "right hand threading." Two taps are required for use.

World-famous Park Tool quality wrapped up in a great set of metric combination wrenches. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip.

World-famous Park Tool quality wrapped up in a combination metric wrench. Features both open and 12-point two-way ratcheting box ends. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip. Strong, comfortable, and beautiful!

Precisely machined for a perfect fit, this 8-notch tool removes and installs the lockring that retains front chainrings found on Bosch Gen 2 e-bike motors after the crank arm is removed. - Fits Bosch Active Line (chainrings less than 20 teeth), Performance Line and Performance Line CX models - For lockrings with 50mm outside diameter and 8 notches - Replacement for Bosch 0275009003 tool - Torque wrench compatible 3/8-inch square drive - Constructed of 4140 heat treated steel and plated for long life

Park's Double-Ended Cone Wrenches are designed for home mechanics. They're made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on a variety of bearing assemblies. Each wrench is chrome plated for long life and available in popular combinations from 11 to 18mm. Most applications require a pair of cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.

Because even your reliable Mavic wheels will eventually need truing, Park offers their Spoke Wrench For Mavic Wheel Systems. This comfortable, vinyl-coated, double-ended spoke wrench easily accesses and turns Mavic nipples. One end fits Mavic 6-spline, 9mm threaded eyelets and the other fits their 7-spline, 6.4mm nipples.

Park Tool's 238K Caliper Upgrade Kit will upgrade the TS-2 Professional Truing Stand to accept wider wheels and tires to increase the versatility of your TS-2 truiing stand. The set includes left and right caliper fingers, and one pair of the plastic removable tips. NOTE: The 238K will not allow the wide 29er wheels with plus-sized tires to be trued in the older TS-2 stands. Use the upright extensions TS-2EXT.2 to for truing 29er wheels with plus-sized tires.

Wall or pegboard mounted holder designed specifically for Park's P-Handle Hex Wrenches. Positions wrenches for easy access with easy-to-read size designation for each tool. Tools sold separately.

- Blade chrome plated, black anodised tip - Handle – polypropylene

The Pack Hanger Alignment Tool allows quick adjustments to be made to the derailleur hanger while on the trail or in the workshop. Alignment fixes are quick and intuitive, as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. And for simple and durable storage, the components of this tool also nest inside of the handle. - Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle. - Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing. - Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required. - Works on 12mm thru axle bikes

Easily carry everything you need for trailside repair, in a secure out-of-the-way location. The engineered design and rubber material of the sleeves keeps everything securely in place, prevents the multi-tools from rattling, and protects the multi-tools from dirt and moisture while still being simple to remove without tools. Extra space was created in the bar plugs to store a Presta-to-Schrader adapter and valve core or a master link for support on the trail. - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Included Drop Bar Fit Kit to customize fit for larger-diameter road handlebars - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)

This adapter tool alows for installation of the crown race without damaging seals. It is compatible with the Park Tool CRS-15.2 crown race setting tube. Internal o-ring retains this adapter on the setting tube during use and storage. CNC machined from aircraft grade aluminum billet. - Fits Park Tool CRS-15.2 crown race setting tube - Design and manufactured in Minneapolis, MN USA - Material - aircraft grade aluminum

- 5 DART plugs for use with the Stan's NoTubes DART tool

Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs

If you have a bike with disc brakes, you'll want Park's Rotor Truing Fork. It allows you to gently adjust bent and damaged disc-brake rotors. It's made from high-quality steel and features 2 laser-cut slots for precise adjustments and a vinyl handle for comfort and control.

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

Rear Shock IFP Height Tool 19mmx70mm (for setting IFP Height) - SIDLuxe A1+ (2020+)

- Durable double-ended brush - Ideal for chains, cogs, derailleurs, and chainrings. - Recommended for use with Pedro's cleaner and degreaser products. - Solvent resistant synthetic handle and bristles. - Not recommended for oral use. Pedro's Toothbrush is designed to tackle the drivetrain and is ideal for cleaning chains, cogs, derailleurs, and chainrings. The ergonomic handle is paired with two purpose built brush features. The tapering length bristles up front are designed to scrub the intricate surfaces of chains, chainrings and cassettes while at the opposite end, longer, stiffer, larger-diameter bristles reach deep between the cassette cogs removing even the deepest dirt and grime. The Pedro's Toothbrush can also be a great tool for applying degreaser to drivetrain parts. While holding the Toothbrush flat with the bristles out to the side, pour degreaser to the bristles. Then quickly move the toothbrush to the drivetrain and apply the degreaser using a light scrubbing motion. This technique works especially well with Pedro's Degreaser 13.

Park Tool's Bottom Bracket Bearing Tool Set removes and installs (with a bearing press which is sold separately) BB86, BB90, BB92 and Press Fit bottom brackets from Shimano, Race Face, SRAM and others that use a nominal 24mm-diameter spindle. This tool has a bearing remover that fits inside the bottom bracket shell and into the bearing so the bearings can be tapped out of the frame with a hammer. The set also includes two bushings that you use in conjunction with a bearing press for precision bearing installation (bearing press sold separately).

The Tool Wrap was designed to make trailside repairs quick and efficient. Featuring multiple flaps that allow you hang it from a wall, act as a changing area foot pad and more, the Tool Wrap is the perfect trailhead companion. - Top flap that can be shut in a car door for a mobile workshop - Bottom flap provides a work space to keep your parts and tools out of the dirt when working on the ground - Pocket layout is ideal for all the tools you need to build a bike - Aluminum eyelets for hanging up in your home or work shop - Dimensions: 68 by 46 cm (main body), 60 by 20 cm top flap (for car door), 32 by 60 cm bottom flap (work space), rolled up diameter size varies

Park's Tire and Tube Repair Kit is a riding essential. It features Park’s glueless Super Patch Kit and strong nylon Tire Levers for quick and easy flat repairs. The kit comes with 3 levers, 6 patches in a small container, and a piece of sandpaper (for roughing the tube to prepare it for patching).

The MTC-40 features a super strong, composite, multi-position handle, with hardened and plated tools and smooth ergonomic operation. Lightweight, compact, and perfect to carry along. - 2.5, 3, 4, 5, 6 and 8mm hex wrenches - T25 & T30 Torx compatible driver - Combo cross/straight tip screwdriver - 5- to 12-speed compatible chain tool* - Rotor straightener - CO2 cartridge inflator adaptor - Bottle opener - Key ring holder - Weight: 217g (7.65 ounces) *The MTC-40 chain tool will not peen Campagnolo 11-speed chain rivets (see CT-4.3 or CT-6.3)