Filter By:
Other
$28.00
This pair of drop outs attach the Divide rack frames to your bike. The asymmetrical design allows for eyelet mounting or attachment to Robert Axle Project thru axles.
- Made from 6061 aluminum and powder coated for durability
- Adjustable height
- Fits front and rear installations
- Fits on all Divide and Divide Fat models
- Includes hardware
$28.00
These pucks attach the Old Man Mountain rack frame to the front or rear of your road, gravel, or cross bike. They provide a secure upper attachment point for the rack. Included in the packet are heavy-duty zip ties, clear protective film, and mounting hardware. Designed for use with carbon, steel, titanium, and aluminum bikes and forks. Slots in the puck also allow for use with metal hose clamps (not intended for carbon bikes). Pucks can be left on the bike for future reinstallation of the rack.
Recommended for use only with specific Panduit brand 120 lbs zip ties. Panduit #BT2LH-TL0.
- One size fits all road, gravel, or cross bikes.
- For use on either rear seatstay or front fork
- Made from a carbon resin composite for lightweight strength
- Includes heavy-duty zip ties with stainless steel tangs (extra zip ties included)
- Includes clear protective film
- Hardware included
$28.00
These pucks attach the Old Man Mountain rack frame to the front or rear of your mountain or fat bike. They provide a secure upper attachment point for the rack. Included in the packet are heavy-duty zip ties, clear protective film, and mounting hardware. Designed for use with carbon, steel, titanium, and aluminum bikes and forks. Slots in the puck also allow for use with metal hose clamps (not intended for carbon bikes). Pucks can be left on the bike for future reinstallation of the rack.
Recommended for use only with specific Panduit brand 120 lbs zip ties. Panduit #BT2LH-TL0.
- One size fits all mountain and fat bikes
- For use on either rear seatstay or front fork
- Made from a carbon resin composite for lightweight strength
- Includes heavy-duty zip ties with stainless steel tangs (extra zip ties included)
- Includes clear protective film
- Hardware included
$80.00
Fit Kit SET813 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your bike with a 12 mm rear thru axle.
This kit includes:
- 12 x 154—172mm thru axle with 1.0 mm thread pitch
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$80.00
Fit Kit SET814 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru axle.
This kit includes:
- 12 x 169—178mm thru axle with 1.5 mm thread pitch
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$82.00
Fit Kit SET808 contains all the parts needed to thru-axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru-axle.
This kit includes:
- 12 x 223—229mm thru axle with 1.5 mm thread pitch
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$80.00
Fit Kit SET703 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to your fork with a 15 mm thru axle.
This kit includes:
- 15 x 158mm thru axle with 15 x 1.5 mm thread pitch
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$80.00
Fit Kit SET715 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to your fork with a 15 mm thru axle.
This kit includes:
- 15 x 198mm thru axle with 1.5 mm thread pitch
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$82.00
Fit Kit SET815 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru axle.
This kit includes:
- 12 x 217—229mm thru axle with 1.0 mm thread pitch
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$10.00
This pair of 14" long extenders attaches the Old Man Mountain rack frame to the rear of your bike. The extenders have a slot for adjustability, which allows you to level the rack on different types of bikes. Includes hardware.
- 14" length
- Includes slots for adjustability
- Made from 6061 aluminum and powder coated matte black for finish and durability
- Can be mounted to eyelets or to the Old Man Mountain pucks if your bike does not have eyelets
- May need to be bent to fit width of frame
- Includes hardware
$10.00
This pair of 6" long extenders attaches the Old Man Mountain rack frame to the front fork. The extenders have a slot for adjustability, which allows you to level the rack on different types of bikes. Includes hardware.
- 6" length
- Includes slots for adjustability
- Made from 6061 aluminum and powder coated matte black for finish and durability
- Can be mounted to eyelets or to the Old Man Mountain pucks if your bike does not have eyelets
- May need to be bent to fit width of frame
- Includes hardware
$80.00
Fit Kit SET705.R contains all the parts to mount the rack to the rigid fork of a road or gravel bike with a 12 mm thru axle.
This kit includes:
- 12 mm thru axle with 120 to 125 mm length and 1.5 mm thread pitch
- A pair of pucks (rectangle, for mounting on rigid road/gravel forks)
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$80.00
Fit Kit SET702 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to your fork with a 15 mm thru axle.
This kit includes:
- 15 x 145 mm thru axle with M14 x 1.5 mm thread pitch to fit Fox 15 x 100 mm forks (may fit others as well)
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$80.00
Fit Kit SET812 contains all the parts needed to thru-axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru-axle.
This kit includes:
- 12 x 159—165mm thru axle with 1.5 mm thread pitch
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$80.00
Fit Kit SET701 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to your fork with a 15 mm thru axle.
This kit includes:
- 15 x 148 mm thru axle with M15 x 1.5 mm thread pitch to fit Rock Shox forks (may fit others as well)
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$62.00
Fit Kit SETQRR contains all the parts to mount the rack to the rear of a road or mountain bike with a 10 x 135mm quick release hub.
This kit includes:
- 10 x 135mm QR Skewer
- A pair of pucks
- Clear protective tape
- all mounting hardware
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
$80.00
Fit Kit SET826 contains all the parts needed to thru-axle mount an Old Man Mountain bike rack to the rear of your bike with a 12 mm rear thru-axle.
This kit includes:
- 12 x 175—184mm thru axle with 1.0 mm thread pitch
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$80.00
Fit Kit SET704 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to your fork with a 15 mm thru axle.
This kit includes:
- 15 x 155 mm thru axle with M14 x 1.5 mm thread pitch to fit Fox Boost forks (may fit others as well)
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$15.00
Need to mount a light on your Old man Mountain rack? Well you're in luck! Here's a light mount that fits clip-on lights and lights with 50mm mount spacing.
- Powder-coated black, 6061 aluminum
$80.00
Fit Kit SET811 contains all the parts needed to thru-axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru-axle.
This kit includes:
- 12 x 168—180mm thru axle with 1.75 mm thread pitch
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$62.00
Fit Kit SETQRF contains all the parts to mount the rack to the front of a road or mountain bike with a 9 x 100mm quick-release hub.
This kit includes:
- 9 x 100mm QR Skewer
- A pair of pucks
- Clear protective tape
- all mounting hardware
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Page 1 of 1